Responsible manufacturing
Sustainability
Manufacturing responsibly for future generations — steel abrasives are among the most recyclable surface-preparation media in the world, and we build on that inherent advantage.
Three pillars
Sustainability built into production
Every environmental commitment we make is measurable, audited, and woven into daily operations — not a marketing statement.
Energy
Rooftop solar arrays and heat-recovery systems on our induction furnaces have reduced energy intensity per ton of finished abrasive by nearly a third since 2018. Every production line runs load-scheduled to off-peak hours wherever possible.
Water
Our closed-loop water atomization system collects, settles, treats and recirculates process water. Effluent quality is monitored continuously against environmental norms. The target is zero untreated discharge from the facility.
Waste
Process scrap, oversized particles and metallic fines are captured and re-melted back into production rather than disposed of. By closing the loop on our raw material stream, waste-to-landfill is kept at zero across normal operations.
Green initiatives
Progress since 2018
Baseline energy audit completed. Heat-recovery systems installed on furnace lines 1 & 2.
Closed-loop water recycling commissioned across atomization towers. Effluent monitoring initiated.
Zero-landfill fines policy introduced. Metallic fines recovery rate reaches 98%.
Rooftop solar phase 1 commissioned — 480 kWp installed, covering 22% of facility power.
ISO 14001-aligned environmental management system implemented with quarterly audits.
Solar phase 2 commissioned — total installed capacity reaches 1.1 MWp, 40% renewable share.
Dust-collection upgrade across all screening stations. Stack emission levels 60% below statutory limits.
Partner with a sustainable supplier
Want to reduce abrasive consumption and waste in your operation? Talk to our team about high-recyclability steel shot and grit tailored to your process.